COVID-19 has resulted in increasing demands on individuals, businesses, and society to clean and disinfect more regularly and thoroughly. In the coming years, it’s expected that these demands are only going to increase, existing cleaning techniques, products and methods need to be updated and changed to combat these growing demands.
Using our unique High-Level Disinfectant, we at COV-RID set about trying to develop products that would make cleaning and disinfecting simpler, quicker, safer, and more economical.
With these aims in mind, we have developed 4 incredible products that utilize our unique HLD, providing cost-effective solutions to these growing problems.
INGREDIENTS IN COV-RID HIGH-LEVEL DISINFECTANT
All the ingredients in COV-RID Products have been selected based on not only their disinfecting properties but also on their known use with a proven history of being safe when coming into contact with skin.
The Quaternary ammonium compounds used in the HLD have been safely used in the food industry for many decades. All the individual ingredients included in COV-RID products have been specifically chosen because they have high safety profiles.
All COV-RID products have been EN 14476 tested and found to be effective against all enveloped
viruses thus including COVID-19.
COV-RID Products are free of flammable solvents, halides, and phenols.
COV-RID Products are biodegradable under the European and American requirements.
HIGH LEVEL DISINFECTANT THERMAL FOGGING SOLUTION
COV-RID HIGH-LEVEL DISINFECTANT OVERVIEW
Thermal fogging does not leave behind any wet residue, thermal fogging is warm and dry. You will not need to wipe down any surfaces post fogging. The fogged area is clean and disinfected and ready to use post fogging.
COV-RID High-Level Disinfectant has been tested to EN14476, EN13697, and EN1650. COV-RID HLD has been found to be effective against all enveloped viruses, including COVID-19.
100% AREA COVERAGE
Thermal fogging enables you to cover 100% of all exposed surfaces with COV- RID HLD. Thermal Fogging enables you to reach all exposed surfaces and areas that would not traditionally be disinfected and cleaned.
As the Fog lands on surfaces the High Level Disinfectant reacts with the viruses and bacteria with which it comes into contact, removing the bacteria and viruses from the surfaces.
COV-RID High Level Disinfectant is designed to be simple to use and will consistently deliver the same high quality results over and over again.
COV-RID High Level Disinfectant after use, provides a disinfected and safe environment for staff and clients. It is safe to use in rooms containing electrical items due to its dry nature of the fog.
COV-RID HLD IS PROVEN TO REMOVE VIRUSES, BACTERIA AND FUNGAL PATHOGENS
COV-RID HLD IS BS EN TESTED
COV-RID HLD has been extensively tested, it conforms to different BS EN
Specific BS EN tests of note are:
- BS EN14476:2013+A2:2019 – Kills 99% of Enveloped Viruses, including COVID-19
- BS EN13697:2015 – Kills 999% of Bacteria
- BS EN1650:2019 – Kills 999% of Fungal Pathogens
Conforming to the BS EN tests quantifiably show that COV-RID HLD is effective against Viruses, Bacteria and Fungal Pathogens.
COV-RID THERMAL FOGGING PROVIDES A FAST, SAFE AND HIGH LEVEL DISINFECTION WITH WHICH TRADITIONAL CLEANING METHODS CANNOT COMPARE
The thermal fogging process has been designed to be simple and quick. A fogging machine will only take a few minutes to heat up then you can start fogging. Thermal fogging enables you to disinfect large areas in a significantly shorter period of time compared with traditional methods.
There are lots of complicated ways to disinfect, however with COV-RID we have made it simple and easy. You simply fog the room leave it for the set time and then return to a disinfected area that you can use immediately. There is no requirement to wipe down anything post fogging.
It is impossible to know all the exposed areas that bacteria and virus particles may have landed on. Subsequently lots of these infected areas are never touched by conventional cleaning. COV-RID provides you with the comfort that 100% of exposed areas will be covered by the High Level Disinfectant fog.
Consumers are demanding more from businesses and employers when it comes to showing they are proving a clean workspace and shopping environment.Over 50% of consumers will pay more for, travel (56%), dining (54%), and retail (52%) if they include enhanced cleaning tools and protocols.
THE DIFFERENCE BETWEEN COLD AND THERMAL FOGGING
Atomising Spray/Cold Fogging
Atomizing sprays (cold foggers) are when a compressor supplies air under pressure via an air hose to a spray gun, which atomizes the liquid to produce a fine spray that is projected. This is a directional spray only landing on what is it pointed towards. You will also hear the atomizing sprayers called Cold Foggers.
The atomizing spray/cold fogger traditionally requires areas to be wiped down post use as they can leave a damp residue behind.
Cold foggers/atomizing sprays can pose a danger to electrical items due to the damp residue they emit.
COV-RID High-Level Disinfectant is heated to form a warm fog. The unique nature of the thermal fog means it naturally spreads to cover 100% of the exposed areas. This enables COV-RID High-Level Disinfectant to disinfect 99.99% of exposed areas.
Thermal fogging produces no wet residue, the warm fog naturally disinfects the virus and bacteria on contact and then dissipates. This means you do not need to wipe down any areas post fogging.
Thermal fogging Is safe to be used in areas that contain electrical items.
COV-RID HIGH LEVEL DISINFECTANT CAN BE USED ACROSS A LARGE SPECTRUM OF LOCATIONS
The thermal fogging with COV-RID High Level Disinfectant can be used across a large spectrum of locations, the dry nature of the fog makes thermal fogging usable around electronics and machinery. Below are just a few examples of where thermal fogging with COV-RID HLD can be used.
COV-RID HIGH LEVEL DISINFECTANT IS SIMPLE AND EASY TO USE
Fill the Area with FOG (1ml of COV-RID HLD to 1 cubic m) close the area and seal the door with the tamper-evident door seal (See Slide 11 for info on Tamper Evident Door Seal)
Remove the tamper-evident seal and enter the area with the knowledge that the area has not been entered since being disinfected. The area is now disinfected and is safe to use
COV-RID TAMPER EVIDENT DOOR SEAL
Consumers believe that the areas they are entering have been cleaned and disinfected to the standard that you tell them. However, they are concerned that the area could have had human interaction since the cleaning of the area and subsequently potentially contaminated with COVID.
The COV-RID Tamper Evident Door Seal has been specifically developed to take away these concerns.
Simple to use, the label is applied to the door after fogging with the time written when the area was fogged and the time when the area is safe to enter written on the door seal. The seal has been specially designed to show OPEN VOID if it is has been removed or tampered with.
COV-RID Tamper-Evident Door Seal untampered
COV-RID Tamper-Evident Door Seal after being removed
The COV-RID Tamper-Evident Door Seal will give your consumers the peace of mind they are looking for
HOW MUCH DOES 1L OF COV-RID HIGH LEVEL DISINFECTANT DISINFECT
The ability to effectively disinfect large spaces in short periods of time is a significant challenge for both businesses and individuals
The standard bottle of COV-RID High-Level Disinfectant has the capacity to disinfect over 1,000m³. To help
illustrate these examples are shown below.
Hotel room size 30M³
Over 30 Rooms can be disinfected with 1 Litre of COV-RID High-Level Disinfectant
Gym size 320M³
Over 3 Gyms can be disinfected with 1 Litre of COV-RID High-Level Disinfectant
The testing COV-RID can provide you is cost-effective method for you to display that you are providing a clean, safe, and disinfected environment.
It is a quick process, from the collection of the samples, the incubation of the contact plates, the tests being undertaken, and the report is written will only take a matter of days.
This test can be undertaken as often as you like however clients have generally done an initial test to show evidence that they are providing a safe, clean, and disinfected environment.
COV-RID FOGGED CAR EXAMPLE
FOGGING CARS WITH COV-RID HLD IS SIMPLE AND EASY
Wait for the fog to dissipate and activate on the surfaces, killing the bacteria and viruses. With the Air Conditions still on the fog will take only a few minutes to fully dissipate.
Remove the tamper evident seal and enter the car with the knowledge that the car has not been entered since being disinfected. The car is now disinfected and is safe to use
EXAMPLE OF CAR FOGGED WITH COV-RID HLD
The car below is 4m³ so was fogged with 4ml of COV-RID HLD Solution. It took under 1 min to fill the car with fog. The car was fogged via the driver’s door and car boot. This allowed for an even distribution of fog throughout the car.
The car door was shut and tamper-evident door seal was applied. With the air conditioning still running the fog began to quickly spread around the entire car including the air conditioning unit. You can see the thickness of the fog in the car after being fogged with only 4ml.
The fog took only a matter of minutes to fully dissipate. The car is now clean and disinfected. It requires no wiping down as the fog leaves behind no residue. The tamper-evident door seal is intact showing the car has not been entered since fogging.
HOW MUCH DOES 1L OF COV-RID HLD DISINFECT
The standard bottle of COV-RID High-Level Disinfectant has the capacity to disinfect over 1,000m³.
To help illustrate this, examples are shown below.
KEY TAKE AWAYS
COV-RID High-Level Disinfectant has been EN14476 was tested and found to be effective against all enveloped viruses. This, therefore, includes COVID-19 and many others. prevalent viruses and bacteria.
COV-RID High-Level Disinfectant is deployed as a thermal Fog and therefore naturally spreads around the area. This means that the fog does not need to be specifically directed or sprayed on an area of interest, it will naturally dissipate and cover all exposed areas.
As the high-level disinfectant fog spreads throughout the area, it comes into contact and reacts with the viruses and bacteria both in the air and on surfaces killing them. Leaving you with dry and disinfected surfaces rid of any bacteria and viruses.
COV-RID High-Level Disinfectant is designed to be simple to use and work on a large spectrum on a large spectrum of fogging machines while still consistently delivering high-quality disinfecting results over and over again.
COV-RID ADDITIONAL PRODUCTS
COV-RID TAMPER EVIDENT DOOR SEAL
Consumers believe that the cars and rooms they are entering have been cleaned and disinfected to the standard that you tell them. However, they are concerned that the area could have had human interaction since cleaning and the area/car re-exposed to COVID.
The COV-RID Tamper Evident Door Seal has been specifically developed to take away these concerns. Simple to use, the label is applied to the door after fogging with the time when the car/area was cleaned and fogged and the time when the car/area is safe to enter written on the door seal. The seal has been specially designed to show OPEN VOID if it is has been removed.
These tamper evident door seals can be applied to many other points of entry. The adhesive used to adhere the seal to the door or wall is designed to not leave behind any residue and marks and cause no damage.
- 50mm Width x 110mm Height
The COV-RID Tamper Evident Door Seal will give your consumers the peace of mind they are looking for.